16 mm vs 28 mm Welding Tables: Which Fixture System?
Choose between metric fixture systems using the workpiece, accessory range and existing tooling rather than hole size alone.
Read the guidePRODUCT DETAILS
BESSEY 16mm Eight-Inch Welding Table Clamp
The TW16-20-10-2K model is BESSEY’s 16 mm clamp with an eight-inch capacity and a fixed four-inch throat.
As an Amazon Associate I earn from qualifying purchases. How our links work.
BESSEY
What to know before ordering
- The manufacturer specifies a fixed four-inch throat for TW16-20-10-2K; choose a different model if you need variable reach.
Check current offer on Amazon
Affiliate link. As an Amazon Associate I earn from qualifying purchases.
Choose the exact configuration shown in the listing. Price, seller and availability are confirmed at Amazon.
Specifications & listing details
| Detail | Documented value | Evidence |
|---|---|---|
| Model | TW16-20-10-2K | Amazon listing |
| Listed force | 650 lb | Amazon listing |
| Throat | Fixed, 4 in | Manufacturer |
| Capacity | 8 in | Manufacturer |
| Clamping force condition | 650 lb calculated 2–3 in above a solid all-steel table platform | Manufacturer |
Listing checked September 17, 2026. These are documented claims, not independently measured results.
Manufacturer references
Buying and setup guides
How to Choose Welding Table Clamps
Match clamp opening, throat, contact pad and table connection to flat stock, tubing and upright work.
Read the guideDo You Need an Aluminum Table to Weld Aluminum?
Choose a table for aluminum fabrication by clean support, mechanical workholding and joint access. Understand what an aluminum tabletop does and does not solve.
Read the guideCompare other options
BESSEY · clamp
BESSEY 28mm Twelve-Inch T-Bar Welding Table Clamp
This BESSEY T-bar clamp is listed for 28 mm matrix tables, with a twelve-inch opening and 5.5 inch throat.
Check price on Amazon
DetailsAffiliate link. As an Amazon Associate I earn from qualifying purchases.
BESSEY · clamp
BESSEY Hold-Down Table Clamp
BESSEY’s BS5N is listed as a hold-down table clamp with a 240/140 mm size designation.
Check price on Amazon
DetailsAffiliate link. As an Amazon Associate I earn from qualifying purchases.
BuildPro · clamp
BuildPro Inserta Pliers with 3.4-Inch Throat
The PTT634K Inserta pliers use a 5/8-inch table insert and a rear crank handle; Strong Hand lists a 3.3-inch opening and 3.4-inch throat.
Check price on Amazon
DetailsAffiliate link. As an Amazon Associate I earn from qualifying purchases.