WELDING TABLE
Choose how the clamp attaches before choosing its handle. Through-hole fixtures, slot-mounted clamps and edge clamps solve different access problems.
As an Amazon Associate I earn from qualifying purchases. How our links work.
The Grasshopper welding finger combines a magnetic base with a spring-loaded brass tip for holding small parts during positioning.
Affiliate link. As an Amazon Associate I earn from qualifying purchases.
A swing-away arm and quick-acting screw distinguish this three-axis fixture vise for joint layouts that need access around intersecting pieces.
Affiliate link. As an Amazon Associate I earn from qualifying purchases.
This 32-piece Klutch workhold base kit is an accessory package for adding positioning options to a welding table.
Affiliate link. As an Amazon Associate I earn from qualifying purchases.
The PTT634K Inserta pliers use a 5/8-inch table insert and a rear crank handle; Strong Hand lists a 3.3-inch opening and 3.4-inch throat.
Affiliate link. As an Amazon Associate I earn from qualifying purchases.
BuildPro’s PTT522K pliers provide a smaller 2.3 inch opening and two-inch throat around a 5/8 inch insert.
Affiliate link. As an Amazon Associate I earn from qualifying purchases.
The UEN5200 Inserta clamp is listed with an 8 1/2 inch opening for taller workpieces.
Affiliate link. As an Amazon Associate I earn from qualifying purchases.
These Turnirace clamps list a 6.5 inch opening for table-mounted workholding.
Affiliate link. As an Amazon Associate I earn from qualifying purchases.
The 8.5 inch Turnirace clamp offer provides more stated opening than the brand’s separate 6.5 inch version.
Affiliate link. As an Amazon Associate I earn from qualifying purchases.
POWERTEC’s 72234-P2 supplies two T-handle clamps with 6 1/2 inch openings and 3 1/4 inch throats.
Affiliate link. As an Amazon Associate I earn from qualifying purchases.
The 72244-P2 two-pack pairs an eight-inch opening with a four-inch throat for deeper table-mounted reach.
Affiliate link. As an Amazon Associate I earn from qualifying purchases.
POWERTEC’s 72244 is the eight-inch-opening T-handle clamp listed separately from the two-pack.
Affiliate link. As an Amazon Associate I earn from qualifying purchases.
Teche’s four-pack combines screw hold-down and positioning tools in a 180-degree fixture format.
Affiliate link. As an Amazon Associate I earn from qualifying purchases.
The UDWN6150 Inserta clamp explicitly belongs to the 16 mm hole system and has a 150 mm opening.
Affiliate link. As an Amazon Associate I earn from qualifying purchases.
Moxweyeni combines two T-handle fixtures with twelve 5/8 inch pins in one workholding set.
Affiliate link. As an Amazon Associate I earn from qualifying purchases.
This BESSEY T-bar clamp is listed for 28 mm matrix tables, with a twelve-inch opening and 5.5 inch throat.
Affiliate link. As an Amazon Associate I earn from qualifying purchases.
The TW16-20-10-2K model is BESSEY’s 16 mm clamp with an eight-inch capacity and a fixed four-inch throat.
Affiliate link. As an Amazon Associate I earn from qualifying purchases.
Yexiya packages two 24-inch locking C-clamp pliers for workholding around a welding table.
Affiliate link. As an Amazon Associate I earn from qualifying purchases.
BESSEY’s BS5N is listed as a hold-down table clamp with a 240/140 mm size designation.
Affiliate link. As an Amazon Associate I earn from qualifying purchases.