WELDING TABLE
Compare BuildPro Inserta pliers and clamps by opening, throat depth and 5/8 inch table attachment.
As an Amazon Associate I earn from qualifying purchases. How our links work.
BuildPro workholding here includes two Inserta pliers sizes and the UEN5200 clamp. Strong Hand specifies a 3.4-inch throat and 3.3-inch opening for PTT634K, compared with a two-inch throat and 2.3-inch opening for PTT522K. Check the exact model when marketplace dimensions differ.
Jaw opening clears the workpiece height; throat depth determines how far the contact point reaches inward. The UEN5200 adds an 8 1/2 inch opening within the manufacturer’s 5/8 inch tooling family.
The PTT634K Inserta pliers use a 5/8-inch table insert and a rear crank handle; Strong Hand lists a 3.3-inch opening and 3.4-inch throat.
Affiliate link. As an Amazon Associate I earn from qualifying purchases.
BuildPro’s PTT522K pliers provide a smaller 2.3 inch opening and two-inch throat around a 5/8 inch insert.
Affiliate link. As an Amazon Associate I earn from qualifying purchases.
The UEN5200 Inserta clamp is listed with an 8 1/2 inch opening for taller workpieces.
Affiliate link. As an Amazon Associate I earn from qualifying purchases.